LG Dishwasher Error Codes
Complete LG Dishwasher Troubleshooting Guide
IE
Water Inlet Error
- Check water supply valve is open.
- Inspect inlet hose for blockage.
- Clean inlet filter screen.
- Ensure proper water pressure.
OE
Drainage Failure
- Check drain hose for clogs.
- Clean dishwasher filter.
- Inspect drain pump operation.
- Reset the unit.
LE
Motor Lock Error
- Turn off power for 10 minutes.
- Check wash motor wiring.
- Inspect for debris in pump.
- Restart cycle.
FE
Water Overflow
- Turn off water supply immediately.
- Check inlet valve for leakage.
- Inspect float switch.
- Dry excess water inside unit.
HE
Heating Error
- Check heating element wiring.
- Inspect thermostat sensor.
- Ensure proper power supply.
- Replace heater if needed.
AE
Leakage Detected
- Inspect hoses and seals.
- Check dishwasher base for water.
- Dry and restart unit.
- Contact technician if leak continues.
TE
Temperature Error
- Inspect temperature sensor.
- Check wiring harness.
- Restart dishwasher.
- Replace sensor if faulty.
E1
Water Leakage Detected
- Turn off power and water supply.
- Check internal hose connections.
- Inspect base tray for water.
- Contact service if unresolved.
E3
Drain Pump Issue
- Clean drain filter.
- Inspect pump for blockage.
- Check drain hose installation.
- Restart dishwasher cycle.
PF
Power Interruption
- Check household power supply.
- Reset circuit breaker.
- Restart wash cycle.
- Avoid unstable power source.
NE
Diverter Motor Error
- Inspect diverter motor connection.
- Check wash arm movement.
- Clean spray system.
- Replace motor if needed.
CD
Cool Dry Mode Active
- This is not an error.
- Dishwasher is in drying cycle mode.
- Wait until cycle completes.
- Cancel cycle if needed.
CL
Child Lock Active
- Press and hold Child Lock button.
- Refer to control panel instructions.
- Wait for lock indicator to disappear.
- Resume operation.
Important: If the issue persists after troubleshooting, disconnect power and contact an authorized LG service technician.